Product Overview
The LPR L6R is RIX's new 640x512 thermal riflescope: a 50mm F0.9 lens, true 3x to 9x optical zoom, a laser rangefinder rated to 2,187 yards, and a ballistic calculator fed by onboard temperature, humidity and pressure sensors.
The magnesium housing comes in about 30 percent lighter than RIX's LEAP series, and it mounts in ordinary 30mm rings.
Watch the hands-on review
We put the LPR L6R in front of the camera and walk through the specs that matter: the sensor, the optical zoom, the rangefinder and what comes in the box.
A 640 thermal scope with real glass zoom
Most thermal scopes zoom by cropping the sensor, which is why the picture turns to mush right when you need it. The LPR L6R moves glass. Push the lever by the eyepiece and the 50mm lens walks from 3x to 9x with the full 640x512 sensor still working, then add 1x to 4x digital on top when you want to get closer. Same lever, one hand.
The sensor is rated under 12 mK NETD, down from under 20 mK on the LEAP L6R. In practice that means more separation between a hog and the warm dirt it is standing on, and a cleaner picture in fog and drizzle where thermal contrast drops off. One owner review on RIX's own site says the image holds up against his 1280 optics, and we will leave that claim with him.
2,187 yard rangefinder
Continuous or single-shot ranging. The laser point is adjustable, so you can line it up with the center of your reticle and stop hunting for the dot.
Ballistics with live weather
Built-in sensors read temperature, humidity and air pressure and pass them to the ballistic calculator. Five zeroing profiles for different rifles or loads.
Records the shot for you
Recoil Activated Video starts recording on the shot at one of three sensitivity levels. 64 GB onboard, streams to your phone over Wi-Fi in the RIX+ app.
Rated for heavy recoil
RIX rates it for 1,000 g at a 0.3 ms pulse, and lists .375 H&H, 12 gauge and 9.3x64 as platforms it is built for.
Mounting and power
The LPR L6R uses a standard 30mm tube, so it ships on 30mm rings with a Picatinny base and will also drop into any compatible 30mm mount you already own. RIX recommends a mount height of at least 1.58 inches and a maximum ring screw torque of 21 in-lbs.
It runs on a single removable 21700 cell rated for 5.5 hours at 72°F, and two batteries plus a charger come in the box. An adapter sleeve lets it take an 18650, and the USB-C port will run it off a 5V power bank for a long sit in a blind. Cold weather shortens any battery, so carry the spare.
Full specifications
| Sensor type | VOx uncooled focal plane array |
|---|---|
| Sensor resolution | 640x512 |
| Pixel pitch | 12 µm |
| NETD | <12 mK |
| Frame rate | 50 Hz |
| Objective lens | 50 mm, F0.9 |
| Base magnification | 3.0x |
| Optical zoom | 3.0x to 9.0x |
| Digital zoom | 1x to 4x |
| Field of view (H x V) | 8.8° x 7.0° (46.1 x 36.9 ft at 100 yd) |
| Eye relief | 50 mm |
| Diopter adjustment | -5 to +5 |
| Detection range | 2,843 yd (2,600 m) |
| Display | 1.03 in AMOLED, 2560x2560 |
| Laser rangefinder | 2,187 yd (2,000 m) max, accuracy ±1.09 yd |
| Ranging modes | Continuous and single |
| Ballistic calculation | Yes, 5 zeroing profiles |
| Environmental sensors | Temperature, humidity, air pressure |
| Video recording | 1280x1280, .mp4, manual and recoil activated |
| Built-in memory | 64 GB |
| Wi-Fi | Yes, RIX+ app for iOS and Android |
| Battery | Removable 21700, accepts 18650 with included sleeve |
| Runtime per battery | 5.5 hours at 72°F |
| External power | 5V via USB Type-C |
| Tube diameter | 30 mm |
| Max recoil rating | 1,000 g at 0.3 ms |
| Weather rating | IP67 |
| Operating temperature | -4°F to 122°F (-20°C to 50°C) |
| Weight, without battery | 2.01 lb (912 g) |
| Dimensions | 15.3 x 4.1 x 3.4 in (388 x 104 x 86 mm) |
| Housing | Magnesium alloy |
| Warranty | 5 years from RIX |
In the box
- ScopeLPR L6R thermal riflescope
- Mount30mm rings on a Picatinny mount, hex key
- PowerTwo 21700 batteries, battery charger, 18650 adapter sleeve, fireproof battery bag, USB Type-C cable
- ZeroingTen thermal targets, slotted screwdriver for LRF adjustment
- CareLens cloth, protective scope stickers
LPR L6R or LEAP L6R?
The RIX LEAP L6R is still a strong 640 scope and it costs less. The LPR is the one to pick if you want the lower NETD, the longer rangefinder, the onboard weather sensors and a lighter rifle. If you want to see every option at this resolution side by side, browse our 640 thermal scopes, or read the guide to thermal scopes with a rangefinder.
Questions people actually ask
Will the LPR L6R fit my existing scope rings?
If they are 30mm rings, yes. The LPR L6R has a 30mm tube. RIX recommends a mount height of at least 1.58 inches and a maximum of 21 in-lbs on the ring screws.
How long does the battery last?
RIX rates a single 21700 at 5.5 hours at 72°F, and two come in the box. Expect less in cold weather. For an all-night sit you can also run it from a 5V power bank through the USB-C port.
How is it different from the LEAP L6R?
RIX lists lower NETD, a 2,187 yard rangefinder that performs better in humidity, an adjustable laser point with a visible aiming laser, synced optical and digital zoom, a 1.03 inch 2560x2560 AMOLED display, built-in weather sensors for the ballistic calculator, and roughly 30 percent less weight.
What calibers can it handle?
RIX rates it for recoil up to 1,000 g at a 0.3 ms pulse width and names .375 H&H, 12 gauge shotguns and 9.3x64 as examples. Your exact rifle, load and mount still matter, so check the whole setup before you trust it in the field.
How hard is it to zero?
Pick one of the five zeroing profiles, set the distance, and move the reticle with the top and right knobs. A freeze function holds the image so you can adjust without the rifle locked in a rest. Once it is zeroed, line up the rangefinder with the visible laser and the two adjustment screws on the LRF module.
Can I use it during the day?
Yes. Thermal reads heat, not light, so daylight is no problem. We cover what to expect in using a thermal scope during the day.