Cantilever & One-Piece Scope Mounts
Cantilever and one-piece scope mounts hold both rings in one aligned part. Shop Warne X-SKEL, Skyline, Vapor and MaxLite mounts, DNZ Game Reaper integral mounts, DLOC, Audere, MPA, Sig Sauer, Athlon and ATN, in 1 inch, 30mm, 34mm, 35mm and 36mm. Cantilever mounts reach forward for AR-15 and chassis rifles, and DNZ's integral mounts are made for specific hunting rifles.
Shop more mounts
Cantilever mounts for AR and MSR rifles
A cantilever mount extends the front ring forward of the base, which moves the scope ahead on a flat-top AR so you get proper eye relief. Warne makes the Skyline Precision cantilever, Vapor one-piece MSR mounts at AR-15 height, MaxLite MSR mounts and the Hyperlite MSR. Audere's Levitas, Sig Sauer's ALPHA2 and Athlon's Precision and Armor cantilever mounts are here too.
One-piece mounts for bolt rifles
Warne's X-SKEL comes in standard, Super High 1.9", Long Range 20 MOA and quick detach versions. MPA's BA one-piece mount is listed in 1.125" and 1.250" heights. Warne's Skyline bolt rifle mount comes in 30mm and 34mm. Weaver's Thumb-Nut SPR mount and TruGlo's one-piece riser mounts give you a scope mount in one part.
DNZ Game Reaper integral mounts
DNZ's Game Reaper machines the rings and base together for one rifle, so there is no separate base and nothing to line up. They come for the Savage Axis/Edge and round receiver long action, Browning X-Bolt, A-Bolt 3 and BAR/BLR, Winchester XPR, Howa 1500 Superlite, CVA Cascade and Remington 742/760 and 7400/7600. Find your rifle in the product name.
Frequently asked questions
What is a cantilever scope mount?
A one-piece mount with the front ring pushed forward of the base. It lets you set eye relief on rifles where a standard mount would put the scope too far back.
One-piece or two-piece mount?
One-piece mounts keep the rings aligned and stiffen the setup. Two-piece setups save weight and leave more of the action open.
What height mount for an AR-15?
AR-15s usually need a taller mount to line the scope up with your eye. Warne's Vapor MSR mounts are listed at AR-15 height, and X-SKEL Super High mounts are listed at 1.9".